English
French
German
Italian
Russian
Spanish
Portuguese
Dutch
Greek
Japanese
Korean
Home ProductsCore Drill Rig

Hydraulic Core Drill Rig , Top Drive Drilling Rig 5'' Rod 127mm

Send Me The Latest Product Alerts
(No SPAM - We would not sell or share your e-mail address.)

Hydraulic Core Drill Rig , Top Drive Drilling Rig 5'' Rod 127mm

Good Quality Hydraulic Core Drill Rig , Top Drive Drilling Rig 5'' Rod 127mm Sales

Large Image :  Hydraulic Core Drill Rig , Top Drive Drilling Rig 5'' Rod 127mm

Sinocoredrill Group Co.,Ltd

Verified Supplier

CHINA

Business type: Manufacturer, Exporter

Telephone : 86-510-82723272

No.1 Yangming Development Zone, Yangming Zhonglu, Wuxi,China

Product Details:

Place of Origin: CHINA
Brand Name: FORWARD
Certification: CE
Model Number: TDR-80

Payment & Shipping Terms:

Minimum Order Quantity: N/A
Packaging Details: Sea worthy packing
Detailed Product Description

Hydraulic Core Drill Rig , Top Drive Drilling Rig 5'' Rod 127mm 

 


Description
 
TDR -80 is mainly used for coal bed methane exploration, water well drilling, rescue well drilling, shallow oil and gas, mine exploration drilling etc.
The TDR-80 multifunction top drive rig enables each user to drill with following methods, with borehole diameters of 4″(108 mm) to 47″(1 200mm) and drilling depths up1500m
● Rotary-drilling with direct circulation
● Rotary-drill with reverse circulation
● Auger drilling
● Percussion core drilling(ram coring)
● Wire line core drilling
● Down-The-Hole hammer DC and RC drilling
 
 
Drilling Depth Guidelines
 
 
Use 5″rod  127mm                   1800 – 1 500 m
Use 4-1/2 ″rod                          2000– 2400 m
Use 4″rod                                 2800 – 3200 m
 
The figures in these tables have been calculated, based on field experiences, based on a vertical, straight, and clean down hole. Actual drilling capacity will depend on in-hole tools, conditions, drilling techniques and equipment used.
 
 
General
 
The TDR-80 is mounted on the undercarriage of excavator with a total weight of 58 ton. The engine power 552 Kw.
 
Mast
Constructed of high tensile steel and hydraulically elevated, lowered and setting by four (4) double acting hydraulic cylinders. The mast is equipped with 4 guide rails for the carrier of the drill head and a suspension for the feed device. The rig also is equipped slipper system, in order to the mast slip, and the stroke is 3.65m, lead to the mast can support on the ground. The rig can set up the blowout preventer and other system.
 
Mud Line System
All mud lines on the TDR-80 Drilling Rig have 3" (76.2mm) diameter, in order to reduce friction losses to a minimum.
 
Top Drive head
Top drive head suits for tricone bit, DTH hammer, PDC Dill bit and diamond bit which meets special demand of rotate speed and torque during work. The 4-shift Gearbox using spur gear drive, oil bath lubrication. Hydraulic Motor and gearbox could provide for much high speed and torque to be adjusted.
The angle of rotate unit could be adjusted as needed, ranges from 0º(vertical)--90º.
 
Electrical System
Generator and batter driven by diesel engine altogether provide 24V direct current. All cables are protected by seal line. Furthermore, all circuits are equipped with short-circuited.
 
Additional Rig Components
TDR-80 Rig can be modified. All kinds of aggregates, required for different drilling methods, can be installed on the rig at customer request, or supplied as stand-by aggregates.
 
 

Technical specifications
 

 

Mounting

 

Crawler, Undercarriage of Excavator.

 

Moving Speed

3 Km/h

Power Unit

 

Diesel Engine

STEYR-WEICHAI Diesel engine, 2 valves, turbocharged intercooled. 

Power

276kw *2 set 

Cylinder and Displacement

6 cylinders, 9.726 L

Capacity of Fuel Tank

680 L

Mast

 

Length of Mast ( Fully Expanded)

(20m)

Length of Mast (Fully Retracted)

(14m)

Stroke of Feeding

 (14 m)

Stoke of Mast Slipping

143.7″(3.65m)

Rod and Casing

Ⅰ(5.49-6.7m),Ⅱ(8.23-9.144m),Ⅲ( 11.58-13.71m )

Feeding System

 

Capacity of Pull Back Force

  800 KN

Capacity of Pull Down Force

180 KN

Max. Pull Back Speed

80 m/min

Max. Pull Down Speed

35 m/min

Drill Head

 

4  Shifts, 8 Speeds

 

1st  shift

270 - 600 RPM   7700-4300  Nm

2nd  shift

150 - 280 RPM   7700-13700  Nm

3rd  shift

95 – 170 RPM  12500-22000  Nm

4th  shift

60 – 110 RPM  18000-33600  Nm

Luffing Angle of Drill Head

0 - 90º (from perpendicular to level)

Main Winch

 

Line Pull

30 KN

Wire Rope Diameter

14 mm

Wire Rope Length

45 m

Coring Winch

 

Line Pull

15 KN

Pull Speed

0-280 m/min

Power Tong

 

The tongs are designed and manufactured according to API SPEC 7K standard  Specification for Drilling and Well Servicing Equipment”.

Size Rang

127-203 mm

Max.Torque

100 KNm

Rotation Speed

2.7 – 40 RPM/min

Dimensions and Weight

 

Length in Transport / Working Position

13.8 m / 9.8m

Width in Transport / Working Position

3.2m / 3.2 m

Height in Transport / Working Position

3.4m/19.8 m

Weight

58 000 Kg

Contact Details
Drilling Mud Systems Products Directory

Send your inquiry directly to us (0 / 3000)